Serving You Since 1974!
Dakota Digital Gauge Conversion Kit
Part #: VFD3-67F-PU
Details
Kit mounts into the existing instrument housing.
Special Shipping Required
Due to heavy weight or oversize dimensions, this item may incur additional shipping charges.
1967-1972
Ford Truck
1968-1974
Ford Econoline
Speedometer
·0 -255 MPH (optional metric version 0- 255 km/h)
Tachometer
·0- 17,500 RPM
Oil Pressure
·0- 99 psi
Water Temperature
·0- 300ºF (optional metric version 0- 150ºC)
Fuel Level
·0- 99%
Voltmeter
·8- 17 VDC
Standard Colors
·Blue or Teal
Digital Message Centers
Standard Displays
·Odometer (One time user settable, Million Mile)
·Dual (A/B) Trip Meter (0- 9,999.9)
Performance Meters
·0- 60 MPH Timer (0- 100 kmh)
·1/4 mile time
·1/4 mile end speed (trap speed)
·High speed recall
·High RPM recall
Gauges
·Speedometer (0- 255 MPH/kmh) opposite scale of main speedometer.
Built-in Indicators
Indicators
·Turn Signals (Left/ Right)
·High Beam
·Check Engine
·Parking Brake
·Cruise Control (On/ On & Engaged when vehicle is equipped)
·Gear Position (Optional GSS-2000 sensor required)
·4 x 4 (When vehicle is equipped)
·Wait to Start (When vehicle is equipped)
**Not all OEM indicator lamp functions will be replaced.
- If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.
Included Sensors
Water Temperature
1/8" NPT, ground isolated sensor with a 10 ft harness.
Oil Pressure
1/8" NPT solid state sensor with a 10 ft harness.
Cable Driven Speed Sensor/ Generator
·Replaces Ford and/ or GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required.
Bushings
Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.
Calibration
Pushbutton
Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.
Speedometer |
·0 -255 MPH (optional metric version 0- 255 km/h) |
Tachometer |
·0- 17,500 RPM |
Oil Pressure |
·0- 99 psi |
Water Temperature |
·0- 300ºF (optional metric version 0- 150ºC) |
Fuel Level |
·0- 99% |
Voltmeter |
·8- 17 VDC |
Standard Colors |
·Blue or Teal |
Digital Message Centers |
Standard Displays |
·Odometer (One time user settable, Million Mile) |
·Dual (A/B) Trip Meter (0- 9,999.9) |
Performance Meters |
·0- 60 MPH Timer (0- 100 kmh) |
·1/4 mile time |
·1/4 mile end speed (trap speed) |
·High speed recall |
·High RPM recall |
Gauges |
·Speedometer (0- 255 MPH/kmh) opposite scale of main speedometer. |
Built-in Indicators |
Indicators |
·Turn Signals (Left/ Right) |
·High Beam |
·Check Engine |
·Parking Brake |
·Cruise Control (On/ On & Engaged when vehicle is equipped) |
·Gear Position (Optional GSS-2000 sensor required) |
·4 x 4 (When vehicle is equipped) |
·Wait to Start (When vehicle is equipped) |
**Not all OEM indicator lamp functions will be replaced.
|
Included Sensors |
Water Temperature |
1/8" NPT, ground isolated sensor with a 10 ft harness. |
Oil Pressure |
1/8" NPT solid state sensor with a 10 ft harness. |
Cable Driven Speed Sensor/ Generator |
·Replaces Ford and/ or GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required. |
Bushings |
Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads. |
Calibration |
Pushbutton |
Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers. |